Basic Info.
Transport Package
Wooden Case
Product Description
Product Overview:
2CY series gear pump | gear type lubricating pump is mainly used in a variety of mechanical equipment lubrication system for conveying lubricating oil, suitable for conveying viscosity at 10 DEG E (75C.ST), at a temperature of 80 DEG C with lubricating oil, also suitable for conveying corrosive, no lubrication, containing solid particles of the medium, such as high temperature, contact with the unit can be equipped with high temperature resistant material can be. The transportation of non lubricating oil, beverage, low corrosive water, etc., please choose the whole stainless steel gear pump, the unit has production.
This series of gear pump except the ordinary motor, but also according to the user needs to configure the same specifications of explosion-proof motor, users need to put forward explosion-proof motor explosion-proof level (KB, B2d, B3d).
Structure instruction
This product is composed of pump body, gear, front and rear pump cover, safety valve, bearing and sealing device.
1, pump body, front and back cover and other parts of gray iron castings, gear with high quality carbon steel production; also can be used according to user needs of copper or stainless steel production.
2. Safety valve.
2CY series gear lubricating pump itself does not have a safety valve, users need to install the safety valve in the pipeline system when they are in use. KCB, 2CY series gear pump in the pump or pump cover is provided with a safety valve body, when the pump or discharge pipe failure or discharge valve is completely closed due to high pressure and high pressure shock when the safety valve will automatically open, remove some or all of the high-pressure liquid back to the suction chamber, thereby to protect the safety of the pump and piping.
3, bearings.
2CY series gear lubricating pumps adopt DU bearings, tin bronze bearings can be used according to user's requirements. &0818.3-83.3 and 2CY1.1 gear type oil pump adopts DU bearing, tin bronze bearing can be used according to user's requirement.
KCB133-960 and 2CY8-60 gear oil pumps have three structures, DU bearing, tin bronze bearing and rolling bearing, which should be marked when ordering. When ordering, the supplier who fails to quote is supplied by DU bearing structure.
The bearings are built in type and lubricated by conveying medium; 011 bearings and tin bronze bearings can work in non lubricating medium.
4, shaft seal.
The shaft end seal of this series includes three kinds of structures: skeleton oil seal, mechanical seal and packing seal.
A. skeleton oil seal: skeleton oil seal is characterized by convenient maintenance and replacement, low cost, but short service life. The chloroprene rubber skeleton oil seal is suitable for 1001: the following working environment; the fluorine rubber skeleton oil seal applies to the working environment below 200 degrees centigrade.
B. 1 Mechanical Seal: mechanical seal is characterized by reliable sealing, long life and high cost. The matrix of the mechanical seal is made of stainless steel, and the dynamic and static looking media are made of YG8 hard alloy or YG8- graphite respectively, and the temperature is below 200 degrees.
C. packing seal: packing seal is only used in high temperature oil pump, it is characterized by high temperature resistance, a small amount of leakage. The use of the process must be adjusted according to the leakage situation, the use of temperature at 250 degrees: below.
What type of sealing structure the user needs is specified when ordering. All the orders are supplied according to the structure of the butyl rubber skeleton oil seal.
5, inlet and outlet type:
The inlet and outlet of 2CY series gear lubricating pump are the British pipe thread (G) corresponding to the bore diameter, which is directly made on the pump body.
KCB18.3-200 and 2CY1.1-12 gear type oil pump with the waist flange of the threaded port of the pipe; the other pumps don't match the flange; when the user needs to match the flange, it should be marked in the order.
6. The pump and motor are connected by elastic coupling, and installed on the public chassis.
Performance Parameters:
Model specification | caliber of Inlet&outlet | Rotation (r/min) | Flow (L/min) | Power (kw) | output power (Mpa) | Allowable suction vacuum height (m) |
2CY1.1/14.5-2(KCB-18.3) | 3/4 ″ | 1450 | 18.3 | 1.5 | 1.45 | 5 |
2CY2/14.5-2(KCB-33.3) | 3/4 ″ | 1450 | 33.3 | 2.2 | 1.45 | 5 |
2CY3.3/3.3-2(KCB-55) | 1 ″ | 1450 | 55 | 1.5 | 0.33 | 5 |
2CY3.3/5-2(KCB-55) | 1 ″ | 1450 | 55 | 2.2 | 0.33 | 5 |
2CY5/3.3-2(KCB-83.3) | 1 1 / 2″ | 1450 | 83.3 | 2.2 | 0.33 | 5 |
2CY5/5-2(KCB83.3) | 1 1 / 2″ | 1450 | 83.3 | 3 | 0.50 | 5 |
2CY8/3.3-2(KCB200) | 2 ″ | 1450 | 200 | 4 | 0.33 | 5 |
2CY12/1.3-2(KCB200) | 2 ″ | 1450 | 200 | 4 | 0.13 | 5 |
2CY12/3.3-2(KCB200) | 2 ″ | 1450 | 200 | 5.5 | 0.33 | 5 |
2CY12/6-2(KCB200) | 2 ″ | 1450 | 200 | 5.5 , | 0.60 | 5 |
2CY12/10-2(KCB200) | 2 1/2″ | 1450 | 200 | 7.5 | 1.00 | 5 |
2CY18/3.6-2(KCB300) | 3 ″ | 1000 | 300 | 5.5 | 0.36 | 5 |
2CY18/3.6-2(KCB300) | 3 ″ | 1450 | 300 | 7.5 | 0.36 | 5 |
2CY29/3.6-2(KCB483.3) | 3 ″ | 1450 | 483.3 | 7.5 | 0.36 | 5 |
2CY29/10-2(KCB483.3) | 3 ″ | 1450 | 483.3 | 11 | 1.00 | 5 |
2CY38/2.8-2(KCB633-2) | 4 ″ | 1000 | 633 | 11 | 0.28 | 5 |
2CY38/8-2(KCB633-2) | 4 ″ | 1450 | 633 | 22 | 0.80 | 5 |
2CY-60/3-2(KCB960-2) | 4 ″ | 1450 | 960 | 18.5 | 0.30 | 5 |
2CY-60/6-2(KCB960-2) | 4 ″ | 1450 | 960 | 30 | 0.30 | 5 |
Address:
B-1505, White Very Mall, Yuhua District, Shijiazhuang, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Office Supplies, Packaging & Printing, Security & Protection, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Hebei Shangrun Environmental Technology Co., Ltd is a professional and large-scale manufacturer of flange, pipes, valves, fittings, integrating development and production together. Our company was established in 2014. It is a professional company engaged in manufacturing with fixed assets of 10 million Yuan and an annual output of more than 4, 000 tons.
Currently, Shangrun forging is already exported to America, Spain, Australia, Italy and 20 other countries and regions. Our company has always focused on research, development and innovation, machine-processing, assembling and packing production lines. Our product quality is in full compliance with both national and international standards.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
Shangrun forging regards " Reasonable prices, efficient production time and good after-sales service" As our tenet. We prove that we are in global basis to meet the global standards. We hope to cooperate with more customers for mutual development and benefits and welcome potential buyers to contact us.